Debian Stretch Dynamic MOTD

If you read our previous article Debian Jessie Dynamic MOTD, then you may be wondering how this can be accomplished on your fresh new Debian Stretch setup. This is what is presented to the user in terminal when a log on occurs using our previous article.

This feature is very nice as it will give you a quick look at useful information. Unfortunately, Debian Server does not include the dynamic MOTD. First you will need to install some prerequisites and build the directory structure. To do so, run the following commands in terminal. If you would like to add update notification, I have written another article detailing the steps at Debian MOTD Update Notifier.

# install lsb-release
sudo apt-get install lsb-release
# install figlet to enable ASCII art
sudo apt-get install figlet
# create directory
mkdir /etc/update-motd.d/
# change to new directory
cd /etc/update-motd.d/
# create dynamic files
touch 00-header ; touch 10-sysinfo; touch 90-footer
# make files executable
chmod +x /etc/update-motd.d/*
# remove MOTD file
rm /etc/motd

Once the above commands have been run, you can move on to populating the files you created. Below you can copy and paste.

Header (00-header)

#!/bin/sh
#
#    00-header - create the header of the MOTD
#    Copyright (c) 2013 Nick Charlton
#    Copyright (c) 2009-2010 Canonical Ltd.
#
#    Authors: Nick Charlton <hello@nickcharlton.net>
#             Dustin Kirkland <kirkland@canonical.com>
#
#    This program is free software; you can redistribute it and/or modify
#    it under the terms of the GNU General Public License as published by
#    the Free Software Foundation; either version 2 of the License, or
#    (at your option) any later version.
#
#    This program is distributed in the hope that it will be useful,
#    but WITHOUT ANY WARRANTY; without even the implied warranty of
#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#    GNU General Public License for more details.
#
#    You should have received a copy of the GNU General Public License along
#    with this program; if not, write to the Free Software Foundation, Inc.,
#    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

[ -r /etc/lsb-release ] && . /etc/lsb-release

if [ -z "$DISTRIB_DESCRIPTION" ] && [ -x /usr/bin/lsb_release ]; then
        # Fall back to using the very slow lsb_release utility
        DISTRIB_DESCRIPTION=$(lsb_release -s -d)
fi

figlet $(hostname)
printf "\n"

printf "Welcome to %s (%s).\n" "$DISTRIB_DESCRIPTION" "$(uname -r)"
printf "\n"

Once the above commands have been run, you can move on to populating the files you created. Below you can copy and paste.

Sysinfo (10-sysinfo)

#!/bin/bash
#
#    10-sysinfo - generate the system information
#    Copyright (c) 2013 Nick Charlton
#
#    Authors: Nick Charlton <hello@nickcharlton.net>
#
#    This program is free software; you can redistribute it and/or modify
#    it under the terms of the GNU General Public License as published by
#    the Free Software Foundation; either version 2 of the License, or
#    (at your option) any later version.
#
#    This program is distributed in the hope that it will be useful,
#    but WITHOUT ANY WARRANTY; without even the implied warranty of
#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#    GNU General Public License for more details.
#
#    You should have received a copy of the GNU General Public License along
#    with this program; if not, write to the Free Software Foundation, Inc.,
#    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

date=`date`
load=`cat /proc/loadavg | awk '{print $1}'`
root_usage=`df -h / | awk '/\// {print $(NF-1)}'`
memory_usage=`free -m | awk '/Mem:/ { total=$2; used=$3 } END { printf("%3.1f%%", used/total*100)}'`

swap_usage=`free -m | awk '/Swap/ { printf("%3.1f%%", $3/$2*100) }'`
users=`users | wc -w`
time=`uptime | grep -ohe 'up .*' | sed 's/,/\ hours/g' | awk '{ printf $2" "$3 }'`
processes=`ps aux | wc -l`
ip=`hostname -I | awk '{print $1}'`

echo "System information as of: $date"
echo
printf "System Load:\t%s\tIP Address:\t%s\n" $load $ip
printf "Memory Usage:\t%s\tSystem Uptime:\t%s\n" $memory_usage "$time"
printf "Usage On /:\t%s\tSwap Usage:\t%s\n" $root_usage $swap_usage
printf "Local Users:\t%s\tProcesses:\t%s\n" $users $processes
echo
/usr/lib/update-notifier/update-motd-reboot-required
/usr/lib/update-notifier/apt-check --human-readable
echo

Footer (90-footer)

#!/bin/sh
#
#    99-footer - write the admin's footer to the MOTD
#    Copyright (c) 2013 Nick Charlton
#    Copyright (c) 2009-2010 Canonical Ltd.
#
#    Authors: Nick Charlton <hello@nickcharlton.net>
#             Dustin Kirkland <kirkland@canonical.com>
#
#    This program is free software; you can redistribute it and/or modify
#    it under the terms of the GNU General Public License as published by
#    the Free Software Foundation; either version 2 of the License, or
#    (at your option) any later version.
#
#    This program is distributed in the hope that it will be useful,
#    but WITHOUT ANY WARRANTY; without even the implied warranty of
#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#    GNU General Public License for more details.
#
#    You should have received a copy of the GNU General Public License along
#    with this program; if not, write to the Free Software Foundation, Inc.,
#    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

[ -f /etc/motd.tail ] && cat /etc/motd.tail || true

Once these files are populated with the above, you should now be able to logout and then log back in either using putty or on the console and you will be presented with something that looks like below.