I have been using OpenVPN Server as my go to VPN Server for years. It has been the de-facto solution for any of my clients that have ever had a VPN requirement. I really do love OpenVPN, however OpenVPN GUI is a different story. While the actual form and function of the software is outstanding… Read More
Instructions are a re-post from the dell site here. First we will need to add the Dell OpenManage Ubuntu Repository to our machine with the following command. Next to verify OMSA packages, add the repository key to apt and make apt aware of the new software repository by issuing the following command. Next, install one… Read More
Utility Keyword abbreviations Abbreviations chassisname = ch controller = ctrl logicaldrive = ld physicaldrive = pd drivewritecache = dwc hpacucli utility hpacucli hpacucli hpacucli help Note: you can use the hpacucli command in a script Controller Commands Display hpacucli> ctrl all show config hpacucli> ctrl all show config detail Status hpacucli> ctrl all show status… Read More
In order to install HP Array Controller CLI in ESXi you must WinSCP into the desired ESXi Server and copy the attached file to the /tmp directory. Once that is complete run the following command and then reboot the server. As of this writing version 9.40 is the newest Array Controller CLI from HP. To… Read More
If you run HP servers in your shop, specifically the ML or DL series servers with ESXi, you may have noticed that your array controller status is not available under hardware statuses. That’s right, the vanilla install of ESXi does not contain RAID controller drivers for many of the HP RAID devices such as the… Read More
Like many, I have always been a fan of the old Linksys WRT54G/GS/GL routers. These routers have been and still are a work horse in many installations of mine. Originally I was a proponent of DD-WRT firmware and most of my production installs started with DD-WRT. Since that time I have become an even bigger… Read More
This is a basic Powershell script that will allow you to send an email. With that said, I want to point out that the top of the enclosed script has a comments section that includes filename, author, created date and a basic description of the script. While the name of the script is typically indicative… Read More
In order to enable PXE booting with your windows DHCP server, there are two options that must be set. These options are option 066 and 067. Option 066, Boot Server Host Name, defines the IP-address of the PXE Server. Pictured below. Option 067, Bootfile Name, defines the name of the file to load to the… Read More
The PXE file structure on Server 2008 R2 is very important to ensure smooth operation of PXE booting. There are two files that are required for PXE booting to work. You root directory should be C:\PXEServer\TFTProot\. If it is not, then you need to make sure you have made the proper adjustments to the registry… Read More